Technology

on-micro
on-micro

ALL WATERPROOF AND BREATHABILITY REQUESTED IN LEATHER
FEATURES IN THIS MICROFIBER.

onMicro® is a waterproof, breathable technical microfiber upper component developed for safety shoes.

onMicro® contains natural leather properties; it is also antibacterial, washable, light, ecological and against chemicals.
has high resistance.

  • 100% waterproof
  • breathable construction
  • Antibacterial
  • Washable (up to 60°)
  • Ecological
  • Quite durable
on-steam

ONSteam® 100% HEALTHY

onSteam® is a new 100% breathable microfiber layer with a leather feel. It has a moisture absorption capacity of 8 times its own weight in water.

It provides maximum comfort, complete dryness and heat-regulating effect. Sweat does not accumulate inside the shoe; because the fabric transmits it to the outer area where it evaporates, so the foot always stays dry.

  • 100% breathable,
  • Does not contain Chromium VI
  • Ecological
  • CO2-free production system
  • OEKO-TEX® Standard
  • 100% Absorption – external release = complete dryness
  • High abrasion resistance
  • Antibacterial
  • Anti-microbial
3d-air
3d-air

3D Mesh Air® 100% ABSORBENT AND BREATHABLE HYDROPHILIC PRIMER

Thanks to the hydrophilic application, the 3D Air mesh lining gains full moisture absorption; with fully breathable
It keeps the feet cool and dry.

Due to its technical features
It is antibacterial and antimicrobial.

  • Hydrophilic
  • 100% absorbent and breathable
  • Antibacterial (Thermy tex)
  • Soft, light and flexible
  • Comfortable and ergonomic
  • Abrasion resistant
artico

Aloe Vera®

CELL REGENERATOR

Thanks to the micro-encapsulation technology, the lining injected with Aloe Vera scent provides a solution against the formation of bad odor in the shoes.

When the foot comes into contact with the fabric, the micro
capsules slowly release aloe vera at a controlled rate
and emits a nice fragrance.

Aloe Vera application acts as a cell regenerator with extremely positive results for various skin conditions. your skin
It helps to maintain the natural balance. It also gives the fabric a soft, pleasant touch.

artico
biontech
bion-tech

INSOLE THAT FITS PERFECTLY TO THE FOOT SHAPE

Biontech® personalized biomechanical insoles are specially designed to increase body weight distribution to increase pressure area and reduce pressure. It can be precisely adapted to the ergonomics of each foot with the microwave setting for superior comfort. In addition, the base impact, which creates vibrations in the joints,
also reduces its effect.

  • Personalized insole
  • Perfect fit to the shape of your foot,
  • Less joint pain (5.3% in the hip, 17.2% in the knee and 12.6% in the ankle reduces vibrations).
  • Better balance
  • Less muscle fatigue
  • Maximum breathability
  • 100% Complete Dry,
  • Antibacterial
protector-z

DESIGNED BY ProTector Z® ONPROTECTOR
TEXTILE ANTI PERFORATION INSOLE. MAXIMUM PROTECTION WITH ZERO PERFORATION

Pro Tector Z® midsole materials provide textile anti-perforation solutions. It is lighter, more flexible, breathable and safe than steel. It provides maximum resistance against small diameter nails, thermal insulation and enhanced comfort with superior finishing.

Pro Tector Z® is the only legally recognized brand that complies with all norms and standards.

  • Not displayed by metal detectors
  • Provides thermal insulation
  • Reduces fatigue
  • Provides better adhesion
  • Improved foot control and sensitivity
protectorz

Action Flex insoles are specially developed by Trumar.
Designed to provide excellent comfort, Action Flex insoles, thanks to their open-cell structure; It is sweat absorbent and breathable.

Thanks to the holes on the front, it keeps the foot cool and guarantees excellent ventilation and moisture absorption.

The foot-supported structure prevents excessive stretching of the feet and joints and
It provides energy recovery with its effective shock absorbing effect.

protector-z

Foot protectors can come in a variety of sizes and materials. For wider feet, our models have larger volume
equipped with foot protectors; some models have toe protectors in a thinner form. In this way, immediately
We offer the right foot protection options to suit every foot shape.

STEEL

Steel toe guards successfully pass the 200J impact and pressure tests required by the EN20345 Standard and are more stable than guards made of other materials. Steel toes are resistant to breaking under heavy loads and composite toe caps have a thinner appearance.

COMPOSITE

Composite toe guards are approximately one third lighter than steel toe caps and therefore save weight. This lightness does not prevent it from reaching the desired values ​​in the standard and successfully passes the EN 20345 norms. In particular, metals are allowed.
It is suitable for areas where there is no room and thanks to its thermal insulation, it makes the feet feel less hot and cold.

CARBON FIBER

Carbon fiber nose guards provide 20% more protection than the values ​​required by the EN 20345 standard and are approximately steel
40% lighter than noses and therefore comparable to plastic cambers, but with a thinner material appearance
they provide. Carbon Fiber cambers are particularly suitable for use in winter thanks to their low temperature conductivity and are suitable for metal detectors.
don’t get caught

DIRECT INJECTION TECHNOLOGY

This form of production is one of the core competencies of Trumar shoe technology.
It is a process in which the shoe upper is placed in a mold and injected with liquid polyurethane (PU) to anatomically create a midsole and/or outsole.

The advantages gained through this process are as follows:

Robot precision ensures consistent quality in production.
This is the strongest way to join the sole to the upper.
It creates a waterproof seal without using glue or stitches, which keeps the shoe flexible.

And the soles can be decomposed into PU/PU, PU/TPU, PU/Rubber

protector-z

Cordura® is a high quality fabric woven with polyamide fibers.
This material is very light and breathable.

Thanks to its tear and abrasion resistance, Cordura®an upper material
It is very suitable to be. It is also dirt and water resistant and dries quickly.

1000 Denier and above in Trumar Shoes’ Cordura®component models Cordura®fabric is used.

Your foot protection is assured with the ImpacTec® support zones in all our models.

Minimize the risk of injury to your feet thanks to the ImpacTec® protections we use on the ankle, heel and toe parts that take the most impact in possible accident situations.

protector-z

We are a solution partner with the world famous rubber sole manufacturer Vibram® for our boots.

We are proud to produce user-friendly products with Vibram® soles, where durability and comfort are always at the highest level.

You will be able to take safer and non-slip steps thanks to the Vibram® soles designed especially for motorcycle users and in accordance with EN protection standards.